Outlets & Switches That Actually Work — Aurora Homes
Let us guess: you have a Aurora home with at least one outlet that refuses to hold a plug, a switch that works only when you jiggle it, or a kitchen lacking GFCI protection. Our organization fixes exactly these frustrations. We handle outlet installation, switch replacement, GFCI outlet installation, and electrical outlet repair near me. Also USB outlet installation, dimmer switch installation, and smart switch setup. Yes, we do aluminum wiring pigtailing and weatherproof in-use covers. No, we do not leave loose wires or backstabbed connections.
Why Aurora homeowners keep calling us for outlet help
Here are the top four complaints we hear during service calls:
- “The plug falls out of the wall when I vacuum.” – worn internal contacts that no longer grip. $2 part, but dangerous to replace yourself.
- “My bathroom outlet has a test/reset button but it does nothing.” – GFCI that died or was wired incorrectly, leaving you with zero shock protection.
- “I installed a dimmer but now my LED lights flicker.” – wrong dimmer type (forward vs. reverse phase) or mismatched minimum load.
- “My house has two‑prong outlets everywhere.” – ungrounded wiring. We fix with GFCI protection (legal and safe) without rewalling the whole house.
We also replace old almond‑colored outlets with sleek white ones, install tamper-resistant receptacles for homes with toddlers, and add USB‑C ports bedside so you never fight for a charger block again.
What you get when you hire us for outlet or switch work
We treat each job as if it were our own living room. For Aurora residents, our service includes:
- Proper torque on every terminal screw (we use a torque screwdriver, not “tight enough”).
- Pigtailing instead of backstabbing – no loose wires that loosen over time.
- Line/load labeling for GFCI and AFCI outlets – so downstream outlets are actually protected.
- Weatherproof in-use covers for exterior outlets – closed when plugged in, required by NEC.
- Aluminum wiring evaluation – if your home was built in the 1960s‑70s, we inspect and recommend CO/ALR or AlumiConn pigtailing.
- Cleanup and testing – we plug in a tester, trip GFCI, and show you the results before we leave.
Typical time for common Aurora jobs: Replacing a single standard outlet or switch – 15 minutes. Converting a living room outlet to USB‑A/USB‑C – 20 minutes. GFCI outlet installation in a kitchen or bathroom – 30 minutes (more if we find reverse polarity or missing ground). Dimmer switch installation for a dining room chandelier – 30 minutes. Replacing 20 almond outlets with white TR outlets in a 3‑bedroom home – 2 to 3 hours. Adding weatherproof covers to two exterior outlets – 45 minutes. Aluminum pigtailing at one switch box – 30 minutes (includes special connectors and antioxidant paste). Troubleshooting a mystery dead outlet (no power, breaker not tripped) – 1 to 2 hours depending on how many junction boxes we need to open.
The ugly truth about handyman outlet swaps
We see it weekly: a handyman replaced an outlet but used the backstab holes (easy and fast). Six months later, the outlet worked fine — until the homeowner plugged in a space heater. The loose connection arced, melted the outlet, and left scorch marks on the wall. Our organization avoids this completely. We wrap wires clockwise around side screws, torque to spec, and use pigtails for multiple wires. Yes, it takes longer. No, we do not cut corners. For Aurora homeowners, that means outlets that stay cool under load, switches that click positively, and no mystery burn smells. Plus, we bring all outlets up to current NEC – tamper-resistant where required, AFCI where needed, GFCI within 6 feet of water. Handymen do not track code changes. We do.
Ready to finally fix that loose outlet or upgrade to USB? Call us today to schedule your outlet installation or switch replacement in Aurora. Flat rate per device, no travel fee, and a 5‑year warranty on our work. We answer the phone, we show up on time, and we clean up after ourselves.